Today, we went over the structure of the light bulb. Describe how the filament supports are arranged in the "thread" part of the bulb. Why is this arrangement important to where the bulb has to be touched? Be careful to answer both parts of the question.
Dustin-filament of the bulb connects tothe bottom and the side of the bulb to to get energy to the filament
ReplyDeleteWill- one goes to the thread and the other one goes up and down
ReplyDeleteHeather-One of the wires is going up and touching the side of the threads inside.The other one is going straight down.Because it only lights if the battery or the wire is touching the threads and the nob at the bottom of the battery
ReplyDeleteAesha- One of the filaments go down to the bottom of the bulb and the other one goes down and go up to the side of the bulb. It's like this because the wire has to be touching the thread of the bulb and the battery needs to be touching the battery.
ReplyDeletechristoph- the threads need too be touched because the filaments need to be touched by both currents the positive and the negative need to go to the bulb so the threads need to be touched by one or the other so the bulb needs to be touched by both positive and negative ends
ReplyDeleteJD-the wire touches the bottom of the inside of the bulb then one touches the side of the inside of the threads
ReplyDeleteSadie- because you have to have the threads touching and the wires connected in the right spot!
ReplyDeleteDaniel the second wire takes the charge away from the first wire.
ReplyDeleteOne of the filaments in the bilb is going straight down to the bottom and the other goes down then curves under the glass and comes back up to the top of the thread, it is that way cause when you touch the side and the bottom the energy goes to the wavy filament at the top I'm order for it to light. Tiana Canada
ReplyDeletetamia- One of the threads will go down to the bottom of the bulb & then the other goes down to the side of the bulb. it's that way because the wire has to be touched by the end of the bulb.
ReplyDeleteCole- the w ire needs to carry the energy tO the bulb so it will light
ReplyDeleteJacalyn Fields- the filament supports are going out and then they go back in to the bottom of the bulb so that way they will give off enough energy to the filament it's self.
ReplyDeletexzavion gordon- one of the filaments go all the way down and the other goes down and comes back up and turns to the side. The way they are arranged is important because the energy has to flow to both sides.
ReplyDeleteShamarkelle- one wire is connected to the threads of the bulb while the other is connected to the bottom of the bulb to take in energy from the wire(s) and the battery
ReplyDeleteKayla-
ReplyDeleteOne of the filaments goes straight down to the bottom of the bulb and the other curves and comes back up to the side and is connected to the thread of the bulb. I think it is connected like this so that when the thread is touched the energy goes through the bulb and the bottom does the same causing the bulb to light up.
Brianna- One of the wires connect to the bottom of the bulb to get the energy flowing to the battery for the bulb to light
ReplyDeleteOne support touches the threads and the other touches the bottom of the bulb. This is important because this way the electricity is forced to go through the filament lighting the bulb
ReplyDeleteDillon
Bethany-
ReplyDeleteOne wire connects to the bottom and one to the top of the threads. This arrangement is important to lighting the bulb because these wires lead to the filament.
The filament is touching the side of the coils and the bottom nub. Which is why the bulb has to be touched Borge on the bottom and on the threads to light. -Andy
ReplyDeleteBecca- One part of the filament goes straight to the nub of the bulb. The other one goes to the threads of the bulb. This arrangment is important because the wire must touch either the nub or the threads and if a filament isn't there then the bulb will not light because it wouldn't be a complete circuit.
ReplyDeleteConnor- One of the filament supports goes to touch the threads of the bulb and the other goes to the nub of the light bulb. It does this so the energy can flow through the light bulb going through the filament when electricity is going through both the threads and nub.
ReplyDeleteOne of the filaments go straight down to the bottom and the other goes down and curves upward. It need to be like this because the wire has to touch the threads and the bottom of the bulb the nub will touch the battery that arrangement will make it light.
ReplyDeleteHunter Smith- one of the filaments go to the very bottom of the bulb while the other goes to the side of the threads. It is important to arrange them like this because you must have a conductor on both of those spots to light the bulb.
ReplyDeleteAsh- one of the filament supports goes and touches the inside of the threads and the other filament support goes and touches the inside of the nub. This allows it to make a circuit through the threads and to the nub.
ReplyDeleteOne of the filament supports goes straight down to the bottom of the bulb. The other filament support goes down and loops back up touching the top of the threads. This arrangement is important because the bulb must be touched where the filaments are. It must be touched in both places so the electricity will flow through the bulb.
ReplyDeletechandler one filliment support goes to the bottom of the bulb while the other one touches the top of the threads from the inside. this is important because both ends of the bulb are touched, and it allows the current to pass through the filliment and complete the circut.
ReplyDeleteLauren-The filament has one wire that goes to the bottom of the bulb and then one goes to the side and is touching the threads.it is important beacause it is a way for the energy to it to light.
ReplyDeleteBrian-the supports connect the filament to the threads and the other support connects the filament to the nub of the bulb. This is important because the current needs to go through the filaments to light the bulb.
ReplyDeleteBrooks-the filament support has two wires that run to the threads and another one that runs to the nub. This arrangement is important because it allows the current to flow through when you have a correct ciruit tht will light the bulb
ReplyDeleteKristynBelk- One of the filament supports goes straight down to the bottom of the bulb. The other support touches the top of the threads. This arrangement is important because the bulb must be touched where both filaments are. This insures that the electricity will flow through the bulb.
ReplyDeleteOne filament support goes straight down to the nub and the other one turns to go to the threads of the bulb. This is important because that causes the requirement of both parts of the bulb to be touched by the wire or battery for the bulb to light.
ReplyDeleteBrett
Ali T- one filament goes straight down and the other touches the top of the top of the threads. And they both have to do this to keep the flow going
ReplyDeleteTabitha- One of the filament supports attaches to the top of the threads and the other filament attaches to the "nub" of the battery. It is important because where the filament supports are located makes it able for electricity to flow
ReplyDeleteOne wire is connected to the top of the threads and the other wire is connected to the bottom of the light bulb. This arrangement leads to the filament which is why the arrangement is important. -Sarah
ReplyDeleteLogan F.
ReplyDeleteOne of the filaments has to be touching the thread and the other has to be touching the nub. The reason is because one of the charges has to touch the nub and the other has to touch the threads.
Kiera- One of the fillament supports go straight down and the secound dipps down half way and touches the side of the bulb(threads). It is important because that is the meatal part of the bulb which is the only part that works
ReplyDeleteOne filiment has to touch the nub and the other has to touch the thread so that the flow Of electricity has to go from one across the wire to the other filiment
ReplyDeleteJacob d
Gage-the filament supports are connected to the nib of the battery and the threads of the bulb which is why the bulb has to be set up the way it does.
ReplyDeleteKristyn- one of the filaments goes straight down to the nub and the other one goes to the top of the thread. It is important that the filament supporters are like that so the electricity can flow to the bulb threw either the nub or the thread
ReplyDeleteBrittany S.
ReplyDeleteOne of the filament supports goes to the nub of the bulb and the other goes to the top of the threads. The placement of the filament supports is important because the way they are placed helps the electricity flow through the bulb.
Adam B-
ReplyDeleteOne of the filament supports goes to the nub of the bulb and the other goes to the top of the threads. The placement is important because it's this way that allows the electricity to flow.
Malik J.- One of the filaments supports touches the part of the bulb and the other one goes to the top of the threads. The placement is important because it's what gets the electricity flowing
ReplyDeleteArianna-
ReplyDeleteThe bulb's filament is at the bottom of the bulb and the other goes through the threads. the wire needs to be touching both in order to light.
Adam F- One of the filament supports goes to the bottom (nub) and the other goes to the top of the threads. This is important because the filament support takes the electricity (from the battery) to the filament to get it hot causing it to light.
ReplyDeleteLuke M. - The filament supports are touching both side of the threads so it can form a complete path. The current flows from one side of the threads through the filament and out the other side of the threads.
ReplyDeleteThis arrangement is important so that there can be a continuous flow of electricity.
The arrangement of the bulb is made with the one filament support is touching the thread of the bulb and the other filament support connected with the other support with the filament an also touching the nub of the bulb. The arrangement of the bulb is important because the electricity must pass through both filament supports to pass through the filament to give off light.
ReplyDeleteSchyler above
DeleteSara M- The filament runs down and touches the threads of the bulb and the bottom. It's important because that's where the bulb has to be touched.
ReplyDeleteSilas-The filament touches the bulb which produces electricty to the bulb
ReplyDeleteSilas-The filament has to be touching because the produce different charges and it makes electricy
ReplyDeleteKayla w - because the filament surrounding is touching the bulb and the bottom of it
ReplyDeleteOne of the supports is touching the nub on the bulb and the other support is touching the threads, and this is important because this makes it to where the wires have to touch the nub and the other has to touch the threads.
ReplyDeleteDarby- The filament touches both the threads of the bulb and the bottom of the bulb. This is important because the current has to flow through the bulb through both places in order for the bulb to light.
ReplyDeleteGrayson- one support goes to the side and the other goes to the bottom. Those are the two conductors on the bulb.
ReplyDeleteEmily 7
ReplyDeleteThe filament supports are touching the side and the bottom of the bulb. The arrangement Is important because the batter and wire must touch both the side and the bottom of the bulb.
The filament touches the nub and the threads. It's important for that to happen so that electricity can flow.
ReplyDeleteJonathan. One part is touching the nub and the other is touching the side. It is important so it will light and complete a circuit.
ReplyDeleteMorgan.
ReplyDeleteThe filament touches the nub and the threads. It's important so that electricity can flow.
The bulbs filament is at the bottom and the other part goes through the threads. The wire has to be touching the filament and the threads in order to light. --Kortney G.
ReplyDeleteTierra the filament one is shorter then the other and gose to the side and the other one hose all the way down! It has to b touched there so that they can get engery through to light
ReplyDeleteAlden- one filament touches the nub and the other touches the threads. This explains why the nub and treads have to be involved in a circuit for the bulb to light.
ReplyDeleteJohn-- one of the wires connects to the nub of the bulb and the other is connected to the threads both are connected to opposite ends of the filament. This arrangement is important because there needs to be a circuit, a continuos flow of electricity
ReplyDeleteIt is touching both sides so it can have a continuious flow of
ReplyDeleteEnergy. One of the supports Is touching the ridge of the bulb and the other one is touching the nub. --Malorie
Kyandra
ReplyDeleteOne side of the filament support touches the nub of the bulb and the other side of the filament support touches the threads of the bulb.
It is important to the flow of electricity because it gets the electricity. To flow through the filament.
One support of the filament goes to the nub of the bulb and the other goes to the threads. It's important for the electricity to go through the bulb for the electricity
ReplyDeleteTyler
Kristian- in order for the bulb to work one of the filaments has to go down to the threads to complete the circuit. The other filament goes up to support the other threads making a closed circuit. Therefore, the bulb will light.
ReplyDeleteOne part of the filament supports goes all the way down and touches the nub of the blub the other support touches the side of the threads, this is important because it helps the electricty flow. -----JODI WATERS
ReplyDeleteOne touches the thread and the other touches the nub. It is important because the wire has to touch the nub and the threads. Clay
ReplyDeleteJordan M.: one filament support is in the threads and one is in the nub. This is important because there must be two distinct parts, an in and an out to make a closed circut.
ReplyDeleteCourtney
ReplyDeleteone is at the threads and one is at the nub. this is important because there needs to be an in and out.
Jordan F. - one filament support is touching the side of the bulb and the other filament support is touching the bottom of the bulb. The arrangement is important because the electricity must flow through the bulb.
ReplyDeleteKayce
ReplyDeleteThe filament supports conduct electricity from the threads and nub of the bulb through the filament. This is done to conduct electricity in and out of the bulb.
The filament goes down to the nub of the bulb and the other one curves back up to the side which touches the thread of the bulb. Its important because the wire leads to the filament and it has to be a closed circuit to light. -sunita
ReplyDeleteThe filament supports, one goes through one side of the threads and the other filament support goes down through the threads. This is important because this makes it a closed circuit - Sara T
ReplyDeleteOne filament suppport goes straight down and connects to the nub of the bulb. The other filament support goes off to the side and connects to the threads of the bulb. This is important to complete the path of electricity that makes the bulb light. The way the filament supports are set up forces the electricity to flow through the filament and make the bulb light. --Jessica M. (:
ReplyDeleteOne filament support goes down to the nub of the bulb and the other filament support goes to the side where the threads are. It is important to where the bulb has to be touched because the bulb has to be touched on the nub and the threads for electricity to be able to flow through the light bulb. Anna
ReplyDeleteStarling one support is going to the threads and the other is going to the nub. This coducts electricty to the bulb
ReplyDeleteit goes to the side and the bottom this is why both must be touched to light the bulb
ReplyDeleteemily h
Moira
ReplyDeleteIt goes to the side of the threads and to the bottom part of the bulb
This is important because it gets the electricity so the bulb can light up
Julia_ It has to make a closed circuit. It can do this by going from the side of the threads to the numb of the bulb. This causes the electricity filaments and the bulb to light up
ReplyDeleteDalton
ReplyDelete1 filament support touches the side of the bulb and the other one goes down to touch the nub and it is important because in order for there to be a complete path of conductors including the bulb filament they must me touching the thread and the nub
Clarissa- One filament touches down to the nub and that touches the charged part of the battery and the second filament touches inside the tread where the wire gets connected
ReplyDeleteClarissa- it forms a closed circuit
ReplyDeleteWes ....the filaments go down the sides of the threads and to the nub of the bulb. This makes it easy for the bulb to get its power, and to push the power back to the battery.
ReplyDeleteThe filament goes down the side of the threads and the other one touches the nub and that has to be complete in order for the battery to light up if it dosen't have this it wouldn't light up-Shawn
ReplyDeleteCami, One filament is going to the nub and touches the charged part of the battery. The second filament touches the threads where the wire is connected and forms a closed curcuit.
ReplyDeletethe filament goes down and then back up around the threads. it is important that it does this so the whole bulb gets the charge not just some. --shannon j.
ReplyDeleteso the bulb can form a closed circut Cade C
ReplyDeleteOne filament touches the threads of the bulb so the charge from the threads goes to the filament.
ReplyDeleteTyyyyy
One is at the top and one is at the side of the bulb. It is important cause it makes it light
ReplyDeleteJessica j
The filament supports are touching the threads so they can get energy from the battery or wire. This is important so that if the threads of the bulb touch the battery or wire, it will light.
ReplyDeleteKirsten
The energy would go through the filament- Emily J
ReplyDeleteOne is goin to the nub and the other is goin to the threads and it will light the bulb!
ReplyDeletethe filament supports are getting energy from the battery wich needs to touch the threads and the nub of the battery to give it energy!!!!:) elijah smith
ReplyDeleteTrey - te filament goes to the nub and threads so u can out the wire anywhere and the bulb will light
ReplyDeleteIn the inside of the thread: the Things touches the side and bottom of the thread. So no matter of you put the wire on the thread it will light. -karlie
ReplyDeleteThe threads need to be touched to get energy for the bulb to light.
ReplyDeleteRuben
DeleteAntasia-it won't light because both of the main charges wont make it to the bulb thru the wire
ReplyDeleteisiah- the filament of the bulb is touchin the side and that's were the bulb gets its energy
ReplyDeleteThe bulb filaments are going down the middle of the bulb then it goes off to the side so the arrangement is important because it makes the bulb light Logan 5
ReplyDelete